Bosch Appliances Home Security System D7412G ユーザーズマニュアル
D9412G/D7412G | Program Entry Guide | 5.0 RADXSKED
EN | 106
Bosch Security Systems | 1/04 | 47775E
S## Area 1[through 8]
Yes
Unbypass all
points in Area #.
points in Area #.
5
Unbypass All Points: This function is
not available as a command center
function. The entry in the
not available as a command center
function. The entry in the
S## Area #
prompt defines the area(s) where the
sked unbypasses all points. The sked
unbypasses all points in the area,
regardless of how they were bypassed.
This sked can unbypass all points in
multiple areas.
sked unbypasses all points. The sked
unbypasses all points in the area,
regardless of how they were bypassed.
This sked can unbypass all points in
multiple areas.
Default: No
Selection: Yes or No
Enable the sked to unbypass all
points the areas indicated with
Yes.
points the areas indicated with
Yes.
No
Do not unbypass
all points in Area
#.
all points in Area
#.
S## Relay Number
Blank
No relay is
activated.
activated.
6
Relay On: This function emulates the
Chg Relay? command center function
to turn relays on. The entry in the
Chg Relay? command center function
to turn relays on. The entry in the
S##
Relay Number
prompt defines the
specific relay this sked activates. The
sked can activate one relay.
sked can activate one relay.
Default: Blank
Selections: Blank,
1 to 128 for D9412G,
1 to 64 for D7412G
1 to 128 for D9412G,
1 to 64 for D7412G
Enter the number of the relay
the sked activates
the sked activates
1 to 128
Relay to activate.
S## Relay Number
Blank
No relay is turned
off.
off.
7
Relay Off: This function emulates the
Chg Relay? command center function
to turn relays off. The entry in the
Chg Relay? command center function
to turn relays off. The entry in the
S##
Relay Number
prompt defines the
relay this sked turns off. The sked can
turn off only relays that were set by a
sked. The sked can turn off one relay.
turn off only relays that were set by a
sked. The sked can turn off one relay.
Default: Blank
Selections: Blank,
1 to 128 for D9412G,
1 to 64 for D7412G
1 to 128 for D9412G,
1 to 64 for D7412G
Enter the number of the relay
that turns the sked off.
that turns the sked off.
1 to 128
Relay to turn off.
8
All Relays Off: This function is not available as a command center function. This sked function turns off all
relays that were turned on by a sked. This is a panel-wide function.
relays that were turned on by a sked. This is a panel-wide function.
There are no other parameters that require input for this option.