WatchGuard Technologies WatchGuard SOHO and SOHO | tc ユーザーズマニュアル
Troubleshooting installation and network configuration
32
the LAN Link lights. They tell you if the SOHO is connected to a
computer or hub through that LAN port. If the lights are not
illuminated, the SOHO is not connected to the computer or hub.
Check to make sure that both sides of the cable are connected and
that the computer or hub has power.
computer or hub through that LAN port. If the lights are not
illuminated, the SOHO is not connected to the computer or hub.
Check to make sure that both sides of the cable are connected and
that the computer or hub has power.
I can connect to the configuration screen; why can’t I
browse the Internet?
browse the Internet?
This means that the SOHO is on, but something may be wrong
with the connection from the SOHO to the Internet. Your ISP may
be temporarily down--call your ISP. Make sure the cable or DSL
modem is connected correctly and has power.
with the connection from the SOHO to the Internet. Your ISP may
be temporarily down--call your ISP. Make sure the cable or DSL
modem is connected correctly and has power.
How do I register for Live
Security?
Using your Web browser, go to http://192.168.111.1, and click Live
Security.
How can I see the MAC address of my SOHO?
Using your Web browser, go to http://192.168.111.1/sysstat.htm.
What is a SOHO feature key?
The feature key is an encrypted mask that tells the SOHO which
features are enabled.
features are enabled.
I can't get a certain SOHO feature to work with a DSL
modem.
modem.
Some DSL routers implement NAT firewalls. Running NAT in
front of the SOHO causes problems with WebBlocker and the
performance of IPSec. When a SOHO is used in conjunction with a
DSL router, the NAT feature of the DSL router should be set for
bridge-only mode.
front of the SOHO causes problems with WebBlocker and the
performance of IPSec. When a SOHO is used in conjunction with a
DSL router, the NAT feature of the DSL router should be set for
bridge-only mode.