WatchGuard Technologies WatchGuard SOHO and SOHO | tc ユーザーズマニュアル
User Guide 2.3
55
Rebooting a WatchGuard SOHO
2
Click System Administration.
The System Administration menu appears.
3
Select Remote Logging.
The Secure Remote Logging page appears.
4
Check the box labeled Enable Remote Logging.
5
Enter the IP address of the WatchGuard log server that will be
your remote secure log host.
your remote secure log host.
6
In the Pass Phrase field, enter a pass phrase that will serve as a
password to gain access to the log server.
password to gain access to the log server.
7
In the Retype Phrase field, re-enter the pass phrase.
8
Click
Submit.
This transmits your new user and log names to WatchGuard.
Rebooting a WatchGuard SOHO
To reboot a SOHO located on a local system, use one of the
following methods:
following methods:
• Using your Web browser, go to http://192.168.111.1, click
System Information, then click Features and Version
Information. Click the Reboot button
Information. Click the Reboot button
• Unplug the SOHO and plug it back in
To reboot a SOHO located on a remote system, the SOHO must be
configured to allow either incoming Web or FTP traffic to the
private, internal address of the SOHO. For information on
configuring a SOHO to allow incoming traffic, see “Allowing
incoming services” on page 35
You can than use one of the following methods:
configured to allow either incoming Web or FTP traffic to the
private, internal address of the SOHO. For information on
configuring a SOHO to allow incoming traffic, see “Allowing
incoming services” on page 35
You can than use one of the following methods:
• Open a special HTML page with the public, external SOHO
IP address in the URL followed by
/rebootreq.
q
.