EXSYS USB 1.1 - 1S Serial RS-232 port EX-1301-2 プリント
製品コード
EX-1301-2
U
S
B
1
.1
EX-1301-2
USB 1.1 zu 1S Seriell RS-232 Port (FTDI Chip-Set)
Beschreibung :
Das USB 1.1 zu RS-232 Kabel stellt eine Serielle RS-232 High Performance UART 16C550 Ausgang zur Verfügung. Er ist entwickelt
worden um einen weiteren Seriellen Ausgang für PC, kleine Workstation oder Server über den USB 1.1 oder 2.0 Bus zu erweitern. Durch
die einfache Installation muss der Rechner nicht geöffnet werden und die EX-1301-2 kann bei laufendem Betrieb installiert werden.
worden um einen weiteren Seriellen Ausgang für PC, kleine Workstation oder Server über den USB 1.1 oder 2.0 Bus zu erweitern. Durch
die einfache Installation muss der Rechner nicht geöffnet werden und die EX-1301-2 kann bei laufendem Betrieb installiert werden.
Merkmale :
Schnittstelle: RS-232 V.24
FIFO Buffer: 16C550 mit 16Byte
I/O Adressen: wird vom Betriebs System vergeben
Interrupt: wird vom System BIOS vergeben mit Interrupt Sharing
Daten Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signale: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
FIFO Buffer: 16C550 mit 16Byte
I/O Adressen: wird vom Betriebs System vergeben
Interrupt: wird vom System BIOS vergeben mit Interrupt Sharing
Daten Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: none, even, odd, space, mark
Signale: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Chip-Set :
FTDI
Datentransfer-Rate :
50 Baud bis 115.2KBaud
Anschlüsse :
1 x A-Stecker Upstream
1 x 9 Pin D-SUB Seriell Stecker
1 x 9 Pin D-SUB Seriell Stecker
Hardwaresysteme :
USB 1.1 oder 2.0
Abmessung / Gewicht :
Kabellänge 1.8 Meter / 150g
Lieferumfang :
EX-1301-2, Treiber CD, Handbuch
Arbeitstemperatur :
Luftfeuchtigkeit :
Luftfeuchtigkeit :
0 bis 55
0
C
5 bis 95%
USB 1.1 to 1S Serial RS-232 Port (FTDI Chip-Set)
Description:
The USB 1.1 to RS-232 cable provides one high performance 16C550-type UART compatible RS-232 serial port. It is designed for PC,
thin client or server to provide instant COM port expansion via the USB 1.1 or 2.0 Bus. With the easy installation you don t need to open
the computer system and install the EX-1301-2 when the system run.
thin client or server to provide instant COM port expansion via the USB 1.1 or 2.0 Bus. With the easy installation you don t need to open
the computer system and install the EX-1301-2 when the system run.
Feature :
Interface: RS-232 V.24
FIFO Buffer: 16C550 with 16Byte
I/O addresses: Setting from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
FIFO Buffer: 16C550 with 16Byte
I/O addresses: Setting from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: None, even, odd, space, mark
Signal: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Connectors :
1 x A-male Upstream connector
1 x 9 pin D-SUB serial male connector
1 x 9 pin D-SUB serial male connector
Hardware system :
USB 1.1 or 2.0
Size / Weight :
Cable length 1.8 meter / 150g
Packaging contents :
EX-1301-2, Driver CD, Manual
Chip-Set :
FTDI
Data transfer rate :
50 Baud up to 115.2KBaud
Operating Temperature :
Operating Humidity :
Operating Humidity :
0 up to 55
0
C
5 up to 95%
Anwendung/Application :
Operating System (OS):
Geprüft/Approved:
Verpackung/Packing:
Computer System
Notebook
USB
US
B
Waagen/
Balance
LED Display
Kartenleser
Card reader
Barcode
Reader
Kassensysteme
P.O.S. System