Whirlpool WTW8100BW オーナーマニュアル

Press to turn the washer ON. Pressing once while the 

washer is on will cancel the current cycle. Pressing twice  

will turn the washer OFF.

Turn the Wash Cycle knob to select a cycle for your laundry 

load. See “Cycle Guide” for detailed descriptions of cycles.

The Estimated Time Remaining display shows the time 

required for the cycle to complete. Factors such as load size 

and water pressure may affect the time shown in the display. 

Overloading, unbalanced loads, or excessive suds may 

cause the washer to adjust the cycle time, as well. 
If you have set a delay start to the cycle, the Estimated  

Time Remaining display will show the delay time adjusted. 
When the cycle is complete, the DONE indicator will light 

until the lid is opened. 
The Lid Lock indicator lights up when the lid is locked  

and cannot be opened. If you need to open the lid, press  

START/PAUSE. The lid will unlock once the washer  

movement has stopped. This may take several minutes  

if the load was spinning at high speed. Press START/PAUSE 

again to restart the cycle.

Your washer is specially designed to conserve energy  

and water. Each cycle, along with any selected options,  

will result in different energy and water usage. To use the 

Eco Monitor, choose the best cycle for the load being 

washed, then adjust temperature and spin speed options  

to improve the energy usage within that cycle. 

Press to start the selected cycle; press again to pause  

a cycle.

Use this option to adjust volume of the signal that sounds  

at end of cycle. A louder signal is helpful in removing items 

as soon as cycle is complete. 

You may add or remove options for each cycle. Note that  

not all options can be used with all cycles, and some are 

preset to work with certain cycles. 

The EcoBoost

 option allows you to increase your energy 

savings on your wash cycles. When this option is used,  

the wash cycle will use cooler wash water than the  

selected cycle and may increase the spin speed for  

faster drying. 
EXTRA RINSE 

This option can be used to automatically add a second 

rinse to most cycles.
 FABRIC SOFTENER DISPENSER 

Press this button to set the Fabric Softener dispenser to 

automatically add liquid fabric softener to the load at the 

correct time.  

When you select a cycle, its default settings will light up.

Soil level (wash time) is preset for each wash cycle. As 

you press the Soil Level pad, the cycle time (minutes) will 

increase or decrease in the Estimated Time Remaining 

display and a different wash time will appear. 
For most loads, use the soil level that is preset with the 

cycle you have chosen. For heavily soiled and sturdy 

fabrics, press SOIL LEVEL to select more wash time, if 

needed. For lightly soiled and delicate fabrics, press SOIL 

LEVEL to select less wash time, if needed. A lower soil 

level setting will help reduce tangling and wrinkling.

This washer automatically selects the spin speed based 

on the cycle selected. The preset speeds can be 

changed. Not all spin speeds are available with all cycles.
•  Faster spin speeds mean shorter dry times, but may 

increase wrinkling in your load. 

•  Slower spin speeds mean less wrinkling, but will leave 

your load more damp.

Not all features and cycles are available on all models.