Whirlpool WFW9151YW ユーザーズマニュアル

First try the solutions suggested here or visit our website at www.whirlpool.com/help  

for assistance and to possibly avoid a service call.  

Clogged dispensers or laundry  

products dispensing too soon.

Do not overfill dispenser. Overfilling causes immediate dispensing.
Clean the dispenser compartments, see “Cleaning the Dispenser” 

for more information.
Load dispensers before starting a cycle.
Measure detergent and fabric softener. Slowly pour into the  

dispensers. Wipe up all spills. 
Homes with low water pressure may result in residual powder in the 

dispenser. To avoid, select a warmer wash temperature if possible, 

depending on your load.
Use only liquid chlorine bleach in the liquid chlorine bleach  

compartment. 

Incorrect dispenser 

operation

Liquid chlorine bleach added to 

wrong compartment.

It is normal for small amounts of water to remain in dispenser at the 

end of the cycle.

Water in dispenser after cycle has 

finished.

Empty pockets, zip zippers, and snap or hook fasteners before 

washing to avoid snags and tears.

Sharp items were in pockets during 

wash cycle.
Strings and straps could have tangled.

Items may have been damaged before 

washing.

Mend rips and broken threads in seams before washing.

Fabric damage can occur if washer is  

tightly packed.

Liquid chlorine bleach may have been 

added incorrectly.

Do not pour liquid chlorine bleach directly onto load. Wipe up 

bleach spills.

Undiluted bleach will damage fabrics. Do not use more than  

recommended by manufacturer.

Avoid tightly packing the washer. Load with dry items only.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 additional garments after washer has started.

Tie all strings and straps before starting wash load.

Fabric Damage

The transfer of dye can occur when mixing whites and colors in 

a load. Sort dark clothes from whites and lights.

Use hot or warm washes if safe for the load. Make sure your hot 

water system is adequate to provide a hot water wash.

Use more detergent for washing heavy soils in cold or  

hard water.

Load not sorted properly.

Gray whites, dingy 

colors

Wash temperatures too low.

Not enough detergent used,  

or hard water.

Monthly maintenance not done as  

recommended.

Run the Clean Washer with Affresh

®

 cycle after every 30  

washes. See “Cleaning Your Washer” in “Washer Maintenance.”

Use only HE detergent. Be sure to measure correctly. Always 

follow the manufacturer’s directions.

The suds from non-HE detergent can cause a film residue which 

can result in odor.

See “Cleaning your Washer” section.

This washer has a tight seal to avoid water leaks. To avoid 

odors, leave the door open to allow the washer to dry  

between uses.

Odors

Not using HE detergent or using too 

much HE detergent.

Door not left open after use.

Color-safe bleach or oxi products 

was added to liquid chlorine bleach 

compartment.

Add color-safe bleach or oxi products to the HE detergent  

compartment or directly to the washer basket before adding the 

load. Do not use the chlorine bleach dispenser for color-safe bleach 

or oxi products.

Not washing like colors together.

Wash like colors together and remove promptly after the cycle 

is complete to avoid dye transfer.

Use more detergent for washing heavy soils in cold or  

hard water.

Not enough detergent used,  

or hard water.

Not cleaning or  

removing stains (cont.)