Whirlpool Range W10459123B ユーザーズマニュアル

3. Open broiler door and remove broiler pan. The gas pressure 

regulator is located in the back right hand corner of the broiler 
compartment.

IMPORTANT: Do not remove the gas pressure regulator.

4. Remove the cap from the gas pressure regulator using a 

flat-blade screwdriver.

NOTE: Do not remove the spring beneath the cap.

5. Turn the cap over so the LP is visible.

6. Reinstall the cap.

1. Remove burner grate, burner caps and burners. 

2. Locate LP gas orifice spuds for top burners in the literature 

bag included with the range. Two LP gas spuds are stamped 
“88” and two “78.”

3. Remove Natural gas orifice spuds using a 7 mm combination 

wrench.

4. Install LP gas orifice spuds using a 7 mm combination 

wrench.

NOTE: This range cooktop is equipped with 2 standard 
burners and 2 super burners. Spud size and location remain 
the same.

5. Place the Natural gas orifice spuds in the parts bag for future 

use and keep with the bag containing literature.

6. Reinstall burners, burner caps and burner grates.

A

A

A

A

B

A

B

2 super 

burners. Spud size/location rem ain the sam e.

Standard

Burner 78

Super

Burner 88

Standard

Burner 78

Super

Burner 88