Brother BE-0901E-AC-PC オーナーマニュアル
BE-0901E-AC-PC• BE-1201B-AC-PC
6-11
Chapter 6 Embroidering
Grid
Displays 1
× 1 cm square grids on the background.
1. Select [Grid] from View menu and put the check mark.
Before selecting
After selecting
W1071Q
W1072Q
Hoop
Displays the outline of embroidery hoop. The type of embroidery hoop can be changed in [Load
Hoop] of Settings menu.
!
Embroidering is allowed within the green guide in the hoop.
1. Select [Hoop] from the View menu and put a check mark.
If the hoop is not displayed, carry out the step to read the hoop. For details, refer to [Load Hoop]
(
(
→ page 6-46).
Before selecting
After selecting
W1073Q
W1074Q
Hoop position fine adjustment
Adjusts the view position of embroidery hoop.
!
The position can be adjusted in the range of ±20 mm in both the X and Y directions.
1. Select [Hoop position] from the View menu.
The hoop view position is stored in the hoop data. If you reinstall the program, the hoop view position
is initialized because it is overwritten.
is initialized because it is overwritten.