Whirlpool 1185020 ユーザーズマニュアル

Safety information

5

Operating dehumidifier

Control A

If your control looks like A or B:

adjusts humidity removal set
point (amount of moisture
removed from room)

indicates the bucket is full 
OR
the bucket is not in position

selects fan speed

Control B

adjusts humidity removal set
point (amount of moisture
removed from room)

indicates the bucket is full 
OR
the bucket is not in position

5 

Note: Before turning dehumidifier on,
be sure that:
• Dehumidifier is plugged into the wall

outlet

• Bucket is properly inserted into

dehumidifier

• Bucket is empty

TO TURN DEHUMIDIFIER ON: 

Turn DRYNESS CONTROL clockwise.

FAN SPEED: 

(Models with Control B only): This
controls fan operation. Use desired
setting.
HIGH - for faster moisture removal.
LOW - for slower moisture removal.

DRYNESS CONTROL: 

This controls the amount of moisture in
the room. Turn control knob clockwise
for more drying. Turn control knob
counterclockwise for less drying. Turn
control knob to “NORMAL” to maintain
average humidity conditions.

NOTE: For the first few days of use, turn
the DRYNESS CONTROL clockwise to
“DRYEST” to remove extra moisture from
the furnishings as well as the room air.

EMPTY/ADJUST BUCKET light:

If this light is on, the dehumidifier is not
running. This light indicates that you
need to check:
• If the bucket is full, empty bucket and

replace.

remove bucket and replace. Make 
sure the bucket fits all the way into the
dehumidifier and the light is off,
or dehumidifier will not run.

TO TURN DEHUMIDIFIER OFF: 

Turn DRYNESS CONTROL
counterclockwise to OFF.