Wharfedale Programme 1LT プリント
APPLICATION: Wharfedale Pro Programme 1 < series of
foreground/back-ground music speakers designed for demanding
professional applications such as the reproduction and
reinforcement of music and sound in
foreground/back-ground music speakers designed for demanding
professional applications such as the reproduction and
reinforcement of music and sound in
venues as diverse
airports, places of worship, retail premises, restaurants and
public houses.
public houses.
DESCRIPTION: Programme 1 < Black Two-way 100mm full
range acoustically-efficient enclosure.
range acoustically-efficient enclosure.
DEPLOYMENT: The Programme 1 < can be mounted in a
vertical or horizontal position using the mounting bracket
hardware. All models have been designed for table-top or
bookshelf installation or, with the use of special accessories they
can be installed on the wall or Ceiling mounted.
vertical or horizontal position using the mounting bracket
hardware. All models have been designed for table-top or
bookshelf installation or, with the use of special accessories they
can be installed on the wall or Ceiling mounted.
IMPORTANT NOTE See Warning Section on RIGGING •
SUSPENDING • MOUNTING before attempting to install
Wharfedale Pro Programme 1 < series of speakers.
Optional Brackets are available from Wharfedale Pro.
SUSPENDING • MOUNTING before attempting to install
Wharfedale Pro Programme 1 < series of speakers.
Optional Brackets are available from Wharfedale Pro.
H I G H - I M P E D A N C E / C O N S T A N T - V O L T A G E S Y S T E M :
The Programme 1LT features an internal line-matching
transformer with five power/impedance selections for 100 volt line.
In speaker systems anything over 32
The Programme 1LT features an internal line-matching
transformer with five power/impedance selections for 100 volt line.
In speaker systems anything over 32
Ω is considered high
impedance. Use of constant-voltage distribution in installation
increases the impedance to the desired level at the speaker
location. With the line impedance well above the nominal speaker
impedance, power loss in long speaker lines is minimised. Smaller
wire can be used without excessive power loss.
The five switchable power tappings are 0.6W,1.25, 2.5, 5.0 and 10
watts accessed through an external connecting block at the rear of
the cabinet.
increases the impedance to the desired level at the speaker
location. With the line impedance well above the nominal speaker
impedance, power loss in long speaker lines is minimised. Smaller
wire can be used without excessive power loss.
The five switchable power tappings are 0.6W,1.25, 2.5, 5.0 and 10
watts accessed through an external connecting block at the rear of
the cabinet.
PROGRAMME 1 &1LT SERIES
TECHNICAL SPECIFICATION
MODEL
Drive Units
Power Handling
RMS/Music
Nominal Impedance
Power Taps
SPL Peak
Sensitivity
Enclosure Type
Frequency
Response
Weight (Single Unit)
Mounting
Terminals
Dimension (mm & ins)
H x W x D
Cabinet Finish
Program 1
100mm full range
30W/
Optimum 50W
6 Ohms
NA
-
87dB @ 1m/2.83v
Ported
100Hz-15kHz
1.1kg/2.42lbs
Bracket included
Spring Clip
165x142x122mm
6.5x5.6x4.8”
Mineral Loaded
Polypropylene
Program 1LT
100mm full range
30W/
Optimum 50W
100V Line
0.6W, 1.25W, 2.5W,
5.0W, 10.0W
-
88dB @ 1m/2.83v
Ported
100Hz- 15kHz
1.4kg/3.08lbs
Bracket included
M3 Screw Block
165x142x137mm
6.5x5.6x5.4”
Mineral Loaded
Polypropylene
P R O G R A M M E 1 & L T L O U D S P E A K E R
Wharfedale International Limited, IAG House, Sovereign Court,
Ermine Business Park, Huntingdon, Cambs, PE29 6XU, England
WHARFEDALE website : www.wharfedalepro.com
The information in this manual is subject to change without notice.
All rights reserved © 2001Wharfedale Pro, IAG group
WHARFEDALE SYSTEMS DIVISION
911.391