Weslo WLTL29609.9 オーナーマニュアル

1.    Make sure that the power cord is unplugged.

   With the help of a second person, carefully tip 

the treadmill onto its left side. Unfold the Frame 

(50) away from the Upright (73). Do not lean on 

the Upright.

   Orient the Base (80) as shown. Attach the Base 

to the Upright (73) with four M10 x 65mm  

Screws (1). Start all four Screws, and then 

   Raise the Upright (73), so that the Base (80) is 

flat on the floor.

1

73

80

1

18mm Screw (58)–2

M10 x 65mm Screw (1)–4

M10 x 45mm Screw (2)–4

4.2 x 19mm 

Screw (3)–5

4.2 x 19mm 

Screw (10)–4

#10 x 1" Tek 

Screw (7)–2

two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the pack-

ing materials until assembly is completed. Note: After shipping, there may be an oily substance on the exterior 

of the treadmill. This is normal. If there is an oily substance on the treadmill, simply wipe it off with a soft cloth and 

a mild, non-abrasive cleaner.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the 

key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the 

quantity needed for assembly. Note: Some parts may be preattached. To avoid damaging parts, do not use 

1

50