Weber PLATINUM 3400 Series Natural Gas Barbecue ユーザーズマニュアル

Step 13

Check that all burner valves are off

You will need: one burner control knob.

Valves are shipped in the OFF position, but you should
check to be sure. Put the knob on each valve. Check by
pushing down and turning clockwise. If they do not turn,
they are off, proceed to the next step. Figure 15.

Figure 15

Step 14

Install side burner

You will need: side burner assembly, burner grate, and
manifold bracket.



WARNING: Make sure gas supply is OFF.

Slide the side burner assembly into the open end of the
right frame. Route the side burner hose around the tank
panel so it will not interfere with scale indicator rod.

The side burner hose is connected in the following
manner:

Slide back the collar of the quick disconnect on the
manifold. Push the male fitting of the side burner hose into
the quick disconnect, and maintain pressure. Slide the
collar closed. Figure 16 (a). Figure 16 (b) shows the quick
disconnect engaged.Install burner grate. Check to be sure
the side burner valve is OFF. Push side burner control
knob down and turn clockwise.

Figure 16

Manifold side view

Male fitting

of side burner

Quick disconnect

engaged

Side burner hose