Brother NC9100H ユーザーズマニュアル
5 - 5 CONFIGURING INTERNET PRINTING FOR WINDOWS
®
NC9100h_FM6.0
7
The Print/Fax server is configured by default to poll the POP3
server every 10 minutes. You may change this value, if desired.
server every 10 minutes. You may change this value, if desired.
8
If you have enabled notification, enter the address of your SMTP
server (consult your network administrator if you do not know
this address).
server (consult your network administrator if you do not know
this address).
9
Press the OK button and save the changes. Now exit the
BRAdmin Professional utility. You have now configured the
Print/Fax server to receive print jobs.
BRAdmin Professional utility. You have now configured the
Print/Fax server to receive print jobs.
Brother Internet Print: Using a Web Browser to
Configure the Print Server
Configure the Print Server
1
Connect to the printer server IP address using your web
browser.
browser.
2
When you reach the network configuration screen, you will be
prompted for a password. The default password is “access”.
prompted for a password. The default password is “access”.
3
Select the Configure POP3/SMTP option and enter the
information as described above. For more information, see
Brother Internet Print: Using BRAdmin Professional utility to
Configure the Print Server on page 5-4.
information as described above. For more information, see
Brother Internet Print: Using BRAdmin Professional utility to
Configure the Print Server on page 5-4.
4
You should see a Segmented Message Timeout option. If a
print job is separated into multiple E-mail messages using the
Partial E-mail Print feature of the BIP, this value indicates how
long the Print/Fax server will wait for all of the segments of the
message to arrive.
print job is separated into multiple E-mail messages using the
Partial E-mail Print feature of the BIP, this value indicates how
long the Print/Fax server will wait for all of the segments of the
message to arrive.