Brother NC9100H ユーザーズマニュアル

NOVELL NETWARE PRINTING 6 - 13

Change context if necessary and select the print queue you 
created. Click OK and then OK again, and then exit NWADMIN.

Start the appropriate BRAdmin Professional utility, and select 
the correct Print/Fax server you wish to configure (by default, 
the node names is 

BRN_xxxxxx

, where 

xxxxxx

 is the last six 

digits of the Ethernet address (MAC address)) 

Double click the appropriate Print server. You will be prompted 
for a password, the default password is 

access

.

Now select the NetWare tab.

Select Remote Printer as the Operating Mode, select the name 
of your PSERVER NLM as the Print/Fax server Name and select 
the number of the printer from step 6 as the Printer Number.

Click OK. And exit BRAdmin Professional utility.

You must now unload the PSERVER NLM from your NetWare file 
server console and then reload it in order for the changes to take effect. 

Visit http://solutions.brother.com/ for more information on 
network printing.

To learn how to configure the IP address on your machine, see 
Chapter 11 of this User’s Guide.

You can find the Node name and MAC address by printing 
out the machine configuration page. For information on how 
to print the configuration page on your Print/Fax server, see 
Resetting the Print/Fax Sever back to factory settings (Test 
Switch) on page 13-4.

The same service assigned by NetWare Print server cannot 
be used for both queue server mode and remote printer 
mode. If you want to enable remote printer capabilities on a 
service other than the default NetWare service, you must 
define new services that are enabled for NetWare and for the 
desired port.