Wyse Thin Client R90L ユーザーズマニュアル

Getting to Know the Extended Features

If Wyse USB 802.11b hardware is installed on the thin client, double-clicking the Wireless 
LAN Settings icon in the Control Panel allows you to configure wireless LAN settings 
(such as the wireless network ID, and so on).

The Wireless LAN Settings icon is only available in the Administrator Control 
Panel and is used specifically for an Actiontec USB wireless device only.
The wireless LAN settings made using this icon are not applied to any other 
wireless cards (such as Cisco 350 and Orinoco Silver).
Any non-Actiontec adapters must be configured using the Network 
Connections dialog box (Start | Control Panel | Network Connections) or 
the Device Manager (Start | Control Panel | System | Hardware | Device 
Manager).

For information on configuring the optional Internal Wireless feature installed on some 
Wyse thin clients, refer to "Configuring the Internal Wireless Feature."

You can configure the optional Internal Wireless feature by using either the Windows 
Wireless Zero Configuration utility (see "Using Wireless Zero Configuration (WZC)") or the 
Odyssey Client Manager (for documentation on using the Odyssey Client, refer to

). Supported authentication modes 

are Open, Shared, WPA, and WPA2.

Before using these procedures, be sure you have imported any user 
certificates and computer certificates (of a server) you will need into the thin 
client.

To configure the optional Internal Wireless feature by using WZC:

1. If the Odyssey Client Manager is installed, you must disable it as described in this 

section. If it is not installed, then continue with "Configuring Wireless Thin Clients for 
EAP-TLS Authentication (Smart Card or other Certificate)" or "Configuring Wireless 
Thin Clients for PEAP-MS-CHAP v2.".

To disable the Odyssey Client Manager, right-click on the Odyssey icon in the system 
tray of the Administrator taskbar and click Disable Odyssey.