Wyse Notebook 90955101L ユーザーズマニュアル

Chapter 5

You can participate in domains by writing roaming profiles to the C drive. The profiles must 
be limited in size and will not be retained when the thin client is restarted.

For successful downloading and proper functioning, there must be sufficient 
flash space available for roaming profiles. In some cases it may be 
necessary to remove software components to free space for roaming 
profiles.

WinPing is used to launch the Windows PING (Packet InterNet Groper) diagnostic utility 
and view the results from pinging. To open the WinPing window, click Start | Run, enter 
WinPing

 in the text box, and click OK. 

WinPing is a diagnostic tool that sends an echo request to a network host. The host 
parameter is either a valid host name or an IP address. If the host is operational and on 
the network, it responds to the echo request. The default is to send 5 echo requests and 
then stop if no response is detected. WinPing sends one echo request per second, 
calculates round trip times and packet loss statistics, and displays a brief summary upon 
completion.

WinPing is used to:

•

Determine the status of the network and various hosts.

•

Track and isolate hardware and software problems.

•

Test, measure, and manage networks.

•

Determine the IP address of a host if only the host name is known.

Net and Tracert utilities are available for administrative use (for example, to determine the 
route taken by packets across an IP network). For more information on these utilities, go 
to: 

.