Wyse Notebook 90955101L ユーザーズマニュアル

Chapter 6

This section describes three ways to automatically deploy software updates on thin clients 
using WSUS:

•

•

•

You can configure WSUS on the Wyse thin client to automatically check for and install 
new software updates. By default, the client checks for updates every 22 hours, but you 
can configure a shorter interval (the frequency limit is one hour). When an update is 
available, the client downloads the update, using only available bandwidth, without user 
notification, since there is no impact to user activity (however, you can configure user 
notification, if desired).

Once the software is downloaded to the client, installation can occur according to the 
policy configured using gpedit.msc. When configuring policy, it is important to consider the 
impact of installations on the user. All client updates require reboot of the thin client.

Prerequisites - Before any software updates can be deployed via WSUS, you must:

•

Install WSUS Server v. 2.0 or WSUS Server v.3.0 on the server.

•

Configure communication between the thin client and the server.

To configure WSUS using the GUI:

1. Right-click the My computer icon and select Properties from the context menu.

2. Click the services.msc tab to display the Automatic Update Component and the 

corresponding service.

3. Configure the Group Policy to communicate with the WSUS intranet server.

4. When the Windows Embedded Standard client contacts the WSUS server, notification 

of pending software updates appears on the taskbar.

5. To install the software updates, run the scripts to disable the Write Filter before the 

installation, and enable it after installation, as described in the "About VB Scripts" 
section.

You must disable the Write Filter before you can install the required updates. 
When the Write Filter is enabled, the thin client can save the update files until 
the next client reboot. Upon reboot, the update files are deleted.

To configure WSUS using the command line interface:

1. From the Start menu, choose Run to display the command prompt.

2. At the command prompt, type wuauclt.exe.

3. Run the executable file and configure the Group Policy for the client to communicate 

with the WSUS intranet server.

4. To install the software updates, run a script to disable the Write Filter before the 

installation, and enable it after installation, as described in the "About VB Scripts" 
section.