Worth Data RF Laser ユーザーズマニュアル
19
RF Base Station Parameters
The following parameters apply only to a base station attached serially.
Baud rate
300 0
600 1
1200 2
2400 3
4800 4
9600 5
19,200 6
600 1
1200 2
2400 3
4800 4
9600 5
19,200 6
Data bits
7 Bits
0
8 Bits
1
Set the data bits ("word length") to the same setting your terminal is using, or
you want to use with your serial port.
Parity
None 0
Even 1
Odd 2
Even 1
Odd 2
Set parity to the same setting your terminal is using, or the one you want to use
with your serial port. None is usually used in conjunction with 8 data bits,
Even or Odd with seven data bits.
Stop bits
1 Bit
0
2 Bits
1
Set the stop bits to the same setting your terminal is using, or you want to use
with your serial port.
Protocol
This parameter only applies to serial operation of a Base Station.
None 0
Host Controlled Acknowledge
Host Controlled Acknowledge
1
"None" means that Base Station will immediately transmit an acknowledgement to
the RF Laser from which it has just received transmitted data, (without waiting for
a response from the host computer program.)