Worth Data RF Laser ユーザーズマニュアル
28
Win2000:
1. Log
on
as
Administrator and open the “Administrative Tools”
folder in your Control Panel.
2. Run the “Computer Management” utility.
3. Select the “Tree” tab on the left panel
4. Find the “Device Manager” entry under “System Tools” and click
3. Select the “Tree” tab on the left panel
4. Find the “Device Manager” entry under “System Tools” and click
on it. The right panel will display current devices.
5. Problem devices will be identified with an “!” icon. Find either
the “HID Keyboard Device” under Keyboards or the “USB
Human Interface Device” under Human Interface Devices and
double-click on one of those entries.
Human Interface Device” under Human Interface Devices and
double-click on one of those entries.
6. Now select the “Driver” tab at the top of the window and click
on the “Update Driver” button. Follow the prompts to re-install
the HID driver.
the HID driver.
Serial Troubleshooting
The reader beeps on reads, but nothing appears on your screen using
PortKey OR nothing appears to your own software.
PortKey OR nothing appears to your own software.
•
Recheck the installation instructions beginning on page 4 to make sure
all cables are properly connected.
all cables are properly connected.
•
If you're trying to read Code 39 bar codes with leading spaces (such as
the Barpad on page 23) and have enabled Accumulate Mode, those bar
codes will not be transmitted to your computer until you read a bar
code without a leading space. Try reading the Test Label on page 21 as
an example of a known good label.
the Barpad on page 23) and have enabled Accumulate Mode, those bar
codes will not be transmitted to your computer until you read a bar
code without a leading space. Try reading the Test Label on page 21 as
an example of a known good label.
•
If you're using PortKey on an IBM-compatible, verify that the readers
matches the program's COM port, baud rate, data bits, stop bits, and parity
matches the program's COM port, baud rate, data bits, stop bits, and parity
•
If you're using your own software to read the serial port, verify that the
problem is not in your software. Run the WDR Serial Test Program
that shipped with your reader and see if it gets any data on the screen
when you read a bar code.
problem is not in your software. Run the WDR Serial Test Program
that shipped with your reader and see if it gets any data on the screen
when you read a bar code.
•
Use a "null modem" connector to test switching pins 2 and 3 on one or
more serial cables, or use a breakout box to modify your cable(s).
more serial cables, or use a breakout box to modify your cable(s).
The reader doesn't beep when you try to read your bar codes.
•
Make sure the power adapter is plugged in.
•
Try reading a known good bar code -- the Test Label on page 21,
following the steps for proper scanning technique on page 8.
following the steps for proper scanning technique on page 8.
•
Read the instructions beginning on page 7 on configuring the Reader
for different bar code types and formats, and make sure you properly
enabled the bar code types you're trying to read.
for different bar code types and formats, and make sure you properly
enabled the bar code types you're trying to read.