Woodstock SHOP FOX W1738 ユーザーズマニュアル

-7-

12. Do not force the machine. The machine will do a safer and better job if it does the work.

13. Use the correct tool. Do not force the tool or attachment to do a job for which it was not

designed.

14. Wear proper apparel. Do not wear loose clothing, gloves, jewelry, keep long hair tied up, etc.

15. Remove adjusting keys and wrenches. Before turning the machine on, make a habit of checking 

that all adjusting keys and wrenches have been removed before turning the machine

.

16. DO NOT use extension cord. Due to the high-amperage draw of this industrial machine, we do not

recommend using an extension cord. If you use an extension cord with an undersized gauge or one

that is too long, excessive heat will be generated within the circuit increasing the chance of a fire 

or damage to the circuit. 

17. Keep stable footing and balance at all times.

18. Do not leave machine unattended. Wait until it comes to a complete stop before leaving the 

area.

19. Perform machine maintenance and care. Follow lubrication and accessory attachment 

instructions in the manual.

20. Keep machine away from open flame. Operating machines near pilot lights and/or open flames 

creates a high risk if dust is dispersed in the area. Dust particles and an ignition source may cause 

an explosion. Do not operate the machine in high-risk areas, including but not limited to, those

mentioned above.

21. If at any time you are experiencing difficulties performing the intended operation, stop using the 

machine! Then contact our Service Department or ask a qualified expert how the operation should 

be performed. 

22. Habits—good and bad—are hard to break. Develop good habits in your shop and safety will 

become second-nature to you.