WHP Wireless WHP-1100 ユーザーズマニュアル

existing domain name or create a new one that 
contains up to 32 characters. 

Click to enable or disable the SSID Broadcasts 
feature: If disabled, the Outdoor AP will: 

•  Blocks a connection request from a station 

without the correct SSID. 

•  Hides the SSID in outgoing beacon frames. 

A site-survey tool will not find the SSID. 

Sets the transmission rate at which data packets are 
transmitted by the Outdoor AP. In high-interference 
environments a lower rate can increase overall 
transmission speed by reducing resends of lost 
packets. 

This value determines the basic rates used and 
reported for this BSS by the Outdoor AP. The highest 
rate specified is the rate that the Outdoor AP will use 
when transmitting broadcast/multicast and 
management frames. Available options are: 

•  1 and 2 Mbps 
•  All (1, 2, 5.5, and 11 Mbps) 

You can change the channel number from here. 
Refer to “Regulatory Domains and Channels” on page 
51 for channels supported in each regulatory domain.
 
If the “Automatically” option is selected, the access 
point can choose an available radio channel 
automatically. 

The expiration time for WLAN station without 
activity. 

Identifies the country where the Outdoor AP is used. 
Each country has defined its available channel 
numbers and transmission power (see “Regulatory 
Domains and Channels”). 

Important: 
In a multiple cell network topology, overlapping and/or adjacent cells using different 
channels can operate simultaneously without interference if the difference between 
the center frequencies is at least 30 MHz. For example, channels 1, 7, and 13 are 
non-overlapping frequency channels.