Sunfire HRS-SAT4BIP ユーザーズマニュアル

User's Manual

Troubleshooting

The HRS-SAT4BIP loudspeakers are

designed and built to provide years of

trouble-free performance. Most prob-

lems that occur can usually be solved by

checking your setup, or by making sure

all components are fully operational.

The following information will help you

deal with common problems you may

experience. If a problem persists, please

contact your Dealer for assistance.

Poor or no sound

• Check all the connections from the

loudspeaker to the amplifier or receiver.

Swap loudspeakers around, and see

if the poor sound follows a particular

loudspeaker.

• Check that your amplifier is not driven

too hard or is clipping. Even a low-

powered amplifier driven into clipping

can cause distortion, or damage your

loudspeakers.

• Many processor/preamps can send

test tones through all the loudspeakers

in your system. Use this to adjust the

volume of each channel until they are

all playing at the same level. Make sure

that any bass management options are

set correctly, and any channels using

the loudspeakers are set to "small," or

"95 Hz."

• If the system bass is weak only when

playing surround sources, check that

your processor is correctly set to decode

the surround modes, such as Dolby

Digital or DTS.

• Some DVD discs have a menu that

allows you to select which soundtrack

to play. Check that the correct surround

audio soundtrack is selected.

Service Assistance

If your Sunfire product ever requires service,

write to us or call:
Sunfire,
1300 E New Circle Road, Suite 150
Lexington, KY 40505
Phone 859-514-890
Fax: 859-69-797
You will be directed to an authorized Sunfire

Service Station or receive instructions to

ship the unit to the factory. Please save the

original shipping carton and packing materi-

als in case shipping is required. Please do

not ship Parcel Post.

NOTE: Before sending in your unit for repair,

you must call Sunfire for return authorization.

Include a complete description of the prob-

lem, indicating how you have it connected,

the associated equipment in your system

and a copy of your purchase receipt. Initial

shipping costs are not paid by Sunfire;

return ground shipping costs will be prepaid

if repairs were covered by the scope of this

Warranty.