Sony Music Entertainment Video Games DXF-C50WA ユーザーズマニュアル
Using the Menu
43
a)
If “ASSIGN. 1” or “ASSIGN. 2” in the FUNCTION menu is set
to “MAG,” the magnified section changes in the sequence CNT
t UPPER t RIGHT t LOWER t LEFT when the
respective switch is held down during a magnified display.
to “MAG,” the magnified section changes in the sequence CNT
t UPPER t RIGHT t LOWER t LEFT when the
respective switch is held down during a magnified display.
b)
A measuring instrument is required to adjust the color
temperature.
Changing the BIAS adjustment value alters the GAIN
adjustment value and vice versa. Repeat the adjustment
procedure several times until a sharp focus is obtained.
temperature.
Changing the BIAS adjustment value alters the GAIN
adjustment value and vice versa. Repeat the adjustment
procedure several times until a sharp focus is obtained.
c)
Output level cannot be adjusted when any other setting than
“AUTO” is selected in “AUTO ADJUST.”
“AUTO” is selected in “AUTO ADJUST.”
11
LEVEL ADJUST
AUTO ADJUST
For SD signal input
[AUTO]/PRST 1/
PRST 2/PRST 3
PRST 2/PRST 3
For adjusting the output level of the camera automatically
(AUTO). Otherwise, for selecting a preset’s adjustable value
manually (PRST 1/PRST 2/PRST 3).
Normally selecting “AUTO” is recommended.
Presets are available on the following cameras:
(AUTO). Otherwise, for selecting a preset’s adjustable value
manually (PRST 1/PRST 2/PRST 3).
Normally selecting “AUTO” is recommended.
Presets are available on the following cameras:
PRST 1: DXC series
PRST 2: DSR series
PRST 3: PDW series
PRST 2: DSR series
PRST 3: PDW series
For HD signal input
[AUTO]/PRST
For adjusting the output level of the camera automatically
(AUTO). Otherwise, for selecting a preset’s adjustable value
manually (PRST).
Normally selecting “AUTO” is recommended.
Preset is available on the following cameras:
(AUTO). Otherwise, for selecting a preset’s adjustable value
manually (PRST).
Normally selecting “AUTO” is recommended.
Preset is available on the following cameras:
PRST: HXC-D70 series
AUTO SETUP
– – –/[EXEC]
For executing automatic adjustment of output level when
“AUTO” is selected in “AUTO ADJUST.”
“AUTO” is selected in “AUTO ADJUST.”
Before executing “AUTO SETUP,” input the built-in color bar of
the camera to the viewfinder, and set the camera not to display the
characters or the markers.
the camera to the viewfinder, and set the camera not to display the
characters or the markers.
COLOR BARS
7575/10075/100/
SMPTE/MULTI/
[AUTO]
SMPTE/MULTI/
[AUTO]
For recognizing the type of color bar automatically (AUTO),
or selecting manually (7575/10075/100/SMPTE/MULTI).
or selecting manually (7575/10075/100/SMPTE/MULTI).
GAIN Y
c)
–99 to [0] to 99
For making fine adjustments to the brightness level (Y)
manually.
manually.
GAIN PB/CB
c)
–99 to [0] to 99
For making fine adjustments to the color difference level
(Pb/Cb) manually.
(Pb/Cb) manually.
GAIN PR/CR
c)
–99 to [0] to 99
For making fine adjustments to the color difference level (Pr/
Cr) manually.
Cr) manually.
Page
Menu
Item
Settings
(default in [ ])
(default in [ ])
Function
Note