Soundcraft SoundCraft Home Security System RK-65K ユーザーズマニュアル
(User ID Number 12)
(ADD)
(ENTER)
(ID Number 995)
(THRU)
Add a Transponder by Entering the Transponder ID:
Instead of presenting the transponder, you can also use the
Programmer to enter the Transponder ID number: Put the
unit into the Program mode (See Page 8). Press ADD then
press the sequence of digits representing the desired User ID
Number (1 - 100). Press THRU. Press the sequence of digits
representing the ID number printed on the Transponder, then
press ENTER. For example, to program a Transponder ID
Number 995 into User ID Number 12, the following sequence
would be followed;
Instead of presenting the transponder, you can also use the
Programmer to enter the Transponder ID number: Put the
unit into the Program mode (See Page 8). Press ADD then
press the sequence of digits representing the desired User ID
Number (1 - 100). Press THRU. Press the sequence of digits
representing the ID number printed on the Transponder, then
press ENTER. For example, to program a Transponder ID
Number 995 into User ID Number 12, the following sequence
would be followed;
+ 1 + 2 + + 9 + 9 + 5 +
Record the User ID Number and Transponder ID Number in
the User Log Form.
the User Log Form.
NOTE: If you assign a new transponder to a User ID Number where
another transponder was already assigned, the new transponder
will replace the old transponder for that User ID Number.
another transponder was already assigned, the new transponder
will replace the old transponder for that User ID Number.
Add a Series of Transponders to the System:
Put the unit into the Program mode (See Page 8). Press ADD,
then press the sequence of digits representing the desired
Put the unit into the Program mode (See Page 8). Press ADD,
then press the sequence of digits representing the desired
Secura Key
24
Radio Key
®
RK-65K Operating Guide