Sony CLIE PEG-T615C/G, PEG-T415/G ユーザーズマニュアル
Chapter3
Exchanging and updating data using a HotSync
®
operation
116
Advanced HotSync
®
operations
3
Tap the Enter phone # field.
The Phone Setup dialog box is displayed.
4
Change the following settings if necessary:
1
Enter the telephone number used to access the modem connected to
your computer.
If necessary, enter a dial prefix (such as “9”) to access an outside line,
and tap the Dial prefix check box. You can enter a comma in the field
to introduce a “pause” in the dialing sequence. Each comma equals a
two second pause.
your computer.
If necessary, enter a dial prefix (such as “9”) to access an outside line,
and tap the Dial prefix check box. You can enter a comma in the field
to introduce a “pause” in the dialing sequence. Each comma equals a
two second pause.
2
If the phone line you are using for your CLIÉ handheld has Call
Waiting, select the “Disable call waiting” check box to avoid an
interruption during the modem HotSync operation.
Waiting, select the “Disable call waiting” check box to avoid an
interruption during the modem HotSync operation.
3
If you want to use a calling card to place the call, select the “Use
calling card” check box and enter the calling card number.
calling card” check box and enter the calling card number.
Note
If you plan to connect to your company’s dial-in server (network modem) instead
of connecting to a computer modem, see “Conducting a HotSync
of connecting to a computer modem, see “Conducting a HotSync
®
operation via a
network” on page 119.
5
Tap OK.
The HotSync screen is displayed again.
Continued on next page