Raritan Engineering Command Center CC-SG ユーザーズマニュアル

84 C

OMMAND

C

ENTER 

S

ECURE 

G

ATEWAY 

A

DMINISTRATOR 

G

UIDE

 

 

 

 

7.  Type a Target Username that the application will use as a Start-up parameter. If a target 

name is supplied, then only a password is required when accessing a target. 

8.  Select the associated category and element from the Port Associations table. 
9.  Click  OK to configure the Generic port or Cancel to exit with configuring. A Port 

Configured Successfully message confirms that port has been created. 

10. Repeat steps 1 through 9 to configure other Generic ports. 
 
Configure an Outlet Port 
Outlet ports can be configured for PowerStrip devices and IPMI servers.  
1.  Click on the Devices tab and select a PowerStrip device from the Devices tree. 
2.  On the Devices menu, click Port Manager, and then click Configure Ports. The Configure 

Ports screen appears.