Raritan Engineering Command Center CC-SG ユーザーズマニュアル

C

HAPTER 

2:

 

A

CCESSING 

CC-SG 

13 

 

 

 

Power Down CC-SG 

If running CC-SG on the V1 platform and if it loses AC power while it is up and running, the V1 
unit remembers its last power state. Once AC power is restored, the V1 unit automatically reboots. 
However, if a V1 unit loses AC power when it is turned OFF, the V1 unit will remain powered 
off when AC power is restored.  

Important: Do not hold the POWER button for four or more seconds to forcibly 
power down CC-SG, particularly when CC-SG is up and running. The 
recommended way to power down CC-SG is to use the following procedure.  

To power down the CC-SG: 
1.  Remove the bezel and firmly tap the POWER button.  
2.  Wait for approximately one minute while CC-SG gracefully powers down. You can monitor 

the progress on the console that is attached to the KVM port.  

3.  If removing the AC power cord, let the power down process completely finish before 

removing the power cord. This is required for CC-SG to complete all transactions, close the 
databases, and place the disk drives into a safe state for power removal.  

 

CC-SG Window Components 

 

1.  Ports Selection tab: Click on the Ports tab to display all known target Ports in a Ports tree 

view. Right-click on a port and select Connect to connect to that port. 

2.  Users Selection tab: Click on the Users tab to display all registered Users and Groups in a 

Users tree view. Click on the + and - signs to expand or collapse the tree. 

3.  Devices Selection tab: Click on the Devices tab to display all known Raritan devices in a 

Devices tree view. Different device types have different icons. Known target ports are 
grouped under their parent devices, click on the + and - signs to expand or collapse the tree.  
Right-click on a port and select Connect to connect to that port. 

4

 

5 

1 

2 

3

 

6 

8 

7 

9