Raritan Engineering Command Center CC-SG ユーザーズマニュアル
C
HAPTER
3:
E
XAMPLE
C
ONFIGURATION
W
ORKFLOW
31
6. If needed, enter the Boolean logic to apply additional rules in the Validate panel. Example:
use (Rule0 & Rule1) for AND or use (Rule0 | Rule1) for OR. Additional combinations can be
used.
used.
7. Click Validate then Update.
8. Click Close to close Port Groups Manager screen.
9. Repeat steps 1 through 8 to add other port groups.
8. Click Close to close Port Groups Manager screen.
9. Repeat steps 1 through 8 to add other port groups.
Create/Edit Policies
Polices specify the devices and ports a user can access as well as when they can be accessed.
Polices were automatically created per element when the Association Wizard was run, see section
Create Associations earlier in this chapter for additional information. These policies, for
example, Allow Linux Ports, include the port group that was automatically generated and grant
full access to the ports. Once created, you will then apply the policy to a user group.
1. On the Associations menu, click Policy Manager. The Policy Manager screen appears.
Polices were automatically created per element when the Association Wizard was run, see section
Create Associations earlier in this chapter for additional information. These policies, for
example, Allow Linux Ports, include the port group that was automatically generated and grant
full access to the ports. Once created, you will then apply the policy to a user group.
1. On the Associations menu, click Policy Manager. The Policy Manager screen appears.
Figure 31 Policy Manager Screen
2. Click Add to add a new policy. The Add Appliance Policy window appears.
3. Type the name of the new policy in the Enter Policy Name field.
4. Click OK to add the new policy. If you clicked OK, the new policy name appears in the
4. Click OK to add the new policy. If you clicked OK, the new policy name appears in the
Name field.
5. Click on the Device Group drop-down arrow and select a device group.
6. Click on the Port Group drop-down arrow and select a port group.
7. Click on the up or down arrows in the Start Time and End Time fields to assign a starting
6. Click on the Port Group drop-down arrow and select a port group.
7. Click on the up or down arrows in the Start Time and End Time fields to assign a starting
time and an ending time during a 24-hour period for this policy to be in effect.
8. Select the appropriate option buttons for this policy to be in effect: Any to apply policy every
day, Weekday to apply policy every working day, Weekend to apply policy Saturdays and