Chaparral VFS113 ユーザーズマニュアル

The router has several types of data connections:

I

Fibre Channel (gigabaud interface connector [GBIC])—permitting connection to 
other FC devices, typically through an arbitrated loop or SAN with fabric.

I

Three SCSI channels—permitting the connection of up to 15 devices on each channel.

I

RS-232 serial port—for configuration and management of the router.

I

Ethernet (10BaseT)—connects to your local area network (LAN) to permit 
configuration and management of the router.

For first time installation, install the SCSI devices first to ensure the router and its 
assigned devices are working properly. You should connect all SCSI devices to the router 
and power it on. After proper operation is established, you can proceed to connect the FC 
host and the RS-232 or Ethernet ports.

Figure 2-9. Rear panel components

With the VFS113, you can attach SCSI storage devices to one, two, or three of the router’s 
SCSI channels. Up to 15 SCSI devices can be attached to each channel (45 total). You can 
attach SCSI storage devices to channel 0, for a maximum of 15 SCSI devices.

Tip:  For optimal performance, use channels 1 and 2 first, then 
channel 0 on the VFS113.