Centurion CP72SR5 ユーザーズマニュアル
6
MECHANICAL MOUNTING DETAILS
Option 1 - Bolt down onto concrete plinth
Option 1 - Bolt down onto concrete plinth
- Ensure motor does not protrude into drive-way install baseplate
with centre line 250mm off pillar centre.
with centre line 250mm off pillar centre.
- Position baseplate (43) with centre of single support stud (45) 105mm
from edge of gate (46). (This dimension assumes centre line of rack (47)
is 20mm from edge of gate).
from edge of gate (46). (This dimension assumes centre line of rack (47)
is 20mm from edge of gate).
- Using the baseplate as a template mark and drill the 4 mounting holes
into the concrete for the four M10 x 95 expansion studs.
into the concrete for the four M10 x 95 expansion studs.
- Use two M12 plated nuts per expansion stud as spacers below the
foundation plate.
foundation plate.
- Secure the baseplate to the expansion studs using one M10 washer and
nut per expansion stud.
nut per expansion stud.
105mm
20mm
45
45
43
43
47
47
46
46
L
C