Yamaha SP2060 V1.2 オーナーマニュアル
Panel Operation
SP2060 Owner’s Manual
Fore
w
o
rd
Netw
ork Settings
Ref
erences
P
anel Operation
Intr
oduction
to the SP2060
The Contr
ols
and Connector
s
34
6.
To confirm the operation, press the [YES] key.
The flashing “ON” (or “OFF”) lights up steadily, and the
cursor returns to the “ON (or OFF)” position.
cursor returns to the “ON (or OFF)” position.
To cancel the operation and return to the original set-
ting, press the [NO] key.
ting, press the [NO] key.
User Lock
Parameter settings can be “locked” temporarily to prevent
accidental mis-operation. This function is useful to avoid
unintentional operations or to prevent others from operating
the panel controls. You can specify a password for User Lock.
The following operations are the User Lock target.
accidental mis-operation. This function is useful to avoid
unintentional operations or to prevent others from operating
the panel controls. You can specify a password for User Lock.
The following operations are the User Lock target.
* Editing the parameters
* Recalling and storing a scene
* Changing a scene title
* Changing the scene protection status
* Recalling a library
* Recalling and storing a scene
* Changing a scene title
* Changing the scene protection status
* Recalling a library
1.
Press the [UTILITY] key to select the Utility
display.
display.
The most recently used Utility display will appear.
2.
Press the [UTILITY], [NEXT] or [BACK] key
repeatedly until the User Lock page appears.
repeatedly until the User Lock page appears.
3.
Press the [
▲INC] key to turn User Lock on. To
cancel User Lock, press the [
▼DEC] key.
“ON” flashes on the screen.
4.
Press the [NEXT] key to move the cursor to
the
the
icon.
5.
Press the [YES] key.
A confirmation message will appear.
6.
To confirm the operation, press the [YES] key.
A status message appears, and User Lock becomes active.
NOTE
If you set INPUT A/B LINK to “ON,” the linked parameters for
channel A will be copied to channel B parameters.
channel A will be copied to channel B parameters.
NOTE
• You can mute or unmute, or cancel User Lock even if the User
Lock function is turned on.
• The User Lock function is effective only for the panel controls
on the SP2060, and does not affect any control signals from
external devices.
external devices.
NOTE
If you have specified a password, a password input display will
appear (page 35).
appear (page 35).
INPUT A/B LINK
ARE YOU SURE?
ARE YOU SURE?
USER LOCK
OFF
OFF
HINT
• A short cut to turn on the User Lock function is to hold down
the [MUTE] key for two seconds or longer.
• A short cut to turn off the User Lock function is to hold down
the [MUTE] key for two seconds or longer.
USER LOCK
ON
ON
USER LOCK
ON
ON
USER LOCK
ARE YOU SURE?
ARE YOU SURE?
Panel Locked