ZyXEL Communications Security Camera 3.1 ユーザーズマニュアル

 Chapter 30 AAA Server

ZyWALL (ZLD) CLI Reference Guide

The following table lists the 

radius-server 

commands you use to set the default RADIUS server.  

The following example sets the secret key and timeout period of the default RADIUS server 
(172.23.10.100) to “87643210” and 80 seconds. 

The following table lists the 

aaa group server ad 

commands you use to configure a group of 

AD servers.   

radius-server Commands

show radius-server

Displays the default RADIUS server settings. 

[no] radius-server host 

radius_server auth-port auth_port

Sets the RADIUS server address and service port number. Enter the IP address 
(in dotted decimal notation) or the domain name of a RADIUS server. The 

no

 

command clears the settings. 

[no] radius-server key secret

Sets a password (up to 15 alphanumeric characters) as the key to be shared 
between the RADIUS server and the ZyWALL. The 

no

 command clears this 

setting. 

[no] radius-server timeout time

Sets the search timeout period (in seconds). Enter a number between 1 and 
300. The 

no

 command clears this setting.

Router# configure terminal

Router(config)# radius-server host 172.23.10.100 auth-port 1812

Router(config)# radius-server key 876543210

Router(config)# radius-server timeout 80

Router(config)# show radius-server

host               : 172.23.10.100

authentication port: 1812

key                : 876543210

timeout            : 80

Router(config)#

aaa group server ad Commands

clear aaa group server ad [group-name]

Deletes all AD server groups or the specified AD server group. 

Note: You can NOT delete a server group that is currently in use.

show aaa group server ad group-name

Displays the specified AD server group settings. 

[no] aaa group server ad group-name

Sets a descriptive name for an AD server group. Use this command to enter 
the sub-command mode. 

The 

no

 command deletes the specified server group. 

aaa group server ad rename group-name 

Changes the descriptive name for an AD server group. 

aaa group server ad group-name

Enter the sub-command mode to configure an AD server group.

[no] case-sensitive

Specify whether or not the server checks the username case. Set this to be 
the same as the server’s behavior.