ZyXEL Communications Security Camera 3.1 ユーザーズマニュアル

ZyWALL (ZLD) CLI Reference Guide

Use these commands to modify and display the session timeout values. You must use the 
configure terminal

 command before you can use these commands.

The following example sets the UDP session connect timeout to 10 seconds, the UDP deliver session 
timeout to 15 seconds, and the ICMP timeout to 15 seconds.

Session Timeout Commands

session timeout {udp-connect <1..300> | udp-deliver 

<1..300> | icmp <1..300>}

Sets the timeout for UDP sessions to connect or deliver 
and for ICMP sessions. 

session timeout session {tcp-established | tcp-synrecv 

| tcp-close | tcp-finwait | tcp-synsent | tcp-

closewait  | tcp-lastack | tcp-timewait} <1..300>

Sets the timeout for TCP sessions in the ESTABLISHED, 
SYN_RECV, FIN_WAIT, SYN_SENT, CLOSE_WAIT,  
LAST_ACK, or TIME_WAIT state.

show session timeout {icmp | tcp-timewait | udp}

Displays ICMP, TCP, and UDP session timeouts.

Router(config)# session timeout udp-connect 10

Router(config)# session timeout udp-deliver 15

Router(config)# session timeout icmp 15

Router(config)# show session timeout udp

UDP session connect timeout: 10 seconds

UDP session deliver timeout: 15 seconds

Router(config)# show session timeout icmp

ICMP session timeout: 15 seconds