ZyXEL Communications Security Camera 3.1 ユーザーズマニュアル

Chapter 6 Interfaces

ZyWALL (ZLD) CLI Reference Guide

The following table describes the different kinds of cellular connection status on the ZyWALL.

budget percentage {ptime|pdata} <0..99>

Sets a percentage (0~99) of time budget (ptime) or data (pdata) 
limit. When the specified limit is exceeded, the ZyWALL takes the 
action configured using the budget {log-percentage|log-
percentage-alert} command

. 

budget {log-percentage|log-percentage-

alert} [recursive <1..65535>]

Sets to have the ZyWALL create a log (log-percentage) or an alert 
log (log-percentage-alert) when the set percentage of time budget 
or data limit is exceeded. You can configure the percentage using the 
budget percentage

 command. 

You can also set how often (from 1 to 65535 minutes) to send the log 
or alert.

no budget log-percentage 

Sets the ZyWALL to not create a log when the set percentage of time 
budget or data limit is exceeded. You can configure the percentage 
using the budget percentage command. 

connectivity {nail-up | dial-on-demand}

Sets the connection to be always on or only when there is traffic.  

[no] local-address <ip>

Sets (or clears) the cellular interface’s local (own) IP address.

mtu <576..1492>

Sets the Maximum Transmission Unit in bytes. 

[no] pin <pin code>

Sets (or clears) the PIN code for the cellular device’s 3G card.  Use 1-
4 alphanumeric characters, underscores(

_

), or dashes (-).

[no] remote-address <ip>

Sets (or clears) the IP address of the cellular interface’s peer (like a 
gateway or PPPoE server).

interface cellular budget-auto-save 

<5..1440>

Sets how often (in minutes) the ZyWALL saves time and data usage 
records for a connection using the 3G card.

show interface cellular [corresponding-

slot|device-status|support-device]

Shows the status of the specified cellular interface.

show interface cellular corresponding-slot

Shows which cellular interface is on which slot and whether which 
cellular interface has been configured.

show interface cellular device-status

Displays the installed SIM card and 3G card status.

show interface cellular support-device

Displays all 3G card models the ZyWALL can support.

show interface cellular budget-auto-save

Displays how often (in minutes) the ZyWALL records time and data 
usage of your 3G budgets.

show interface cellular status

Displays the traffic statistics and connection status for your cellular 
interfaces. See 

 for all possible cellular status 

descriptions.

show interface interface_name [budget]

Displays the budget control settings for the specified cellular 
interface.

show interface interface_name device status

Displays the 3G card and SIM card information for the specified 
cellular interface.

show interface interface_name device 

profile

Displays the 3G connection profile settings of the specified cellular 
interface.

Cellular Interface Commands (continued)

Cellular Status

No device

no 3G device is connected to the ZyWALL.

No service

no 3G network is available in the area; you cannot connect to the Internet.