ZTE ZXHN H108L メンテナンスマニュアル
Chapter 1 - Introduction
Confidential and Proprietary Information of ZTE CORPORATION
5
Identification
Description
WLAN
To turn on / off the Wi-Fi.
Reset
This button is on the bottom of modem. In the power-on state,
you can restore the system to the default configuration by using a
you can restore the system to the default configuration by using a
thin needle to press this slot for three seconds or for three
executive times.
executive times.
ON/OFF
To turn on / off the power.
POWER
Power interface. Connect it to the power adapter.
System Requirements
System requirements for the ZXHN H108L router are as follows:
The user has already subscribed the ADSL or Ethernet service. The
service provider shall provide at least one legal IP address
(allocated either statically or dynamically).
service provider shall provide at least one legal IP address
(allocated either statically or dynamically).
One or more PCs with 10/100M Ethernet Network Interface Card
(NIC).
(NIC).
For wireless access, an external or built-in 802.11b/g/n wireless
adapter is required.
adapter is required.
To configure the system via the web page based interface, you
need a web browser such as Internet Explorer (version6.0 or
above), Netscape (version4.7 or above).
need a web browser such as Internet Explorer (version6.0 or
above), Netscape (version4.7 or above).