Znyx Networks bh5700 ユーザーズマニュアル

ページ / 359
You will find the  Ethernet Switch Blade has a straightforward installation and configuration. 
UNIX or Linux system management skills and some understanding of network protocols will be 
required. 
Configure the Ethernet Switch Blades to your networking application before you 
begin using the OpenArchitect switch.
OpenArchitect Switch Environment
The key elements of the OpenArchitect environment include two embedded Linux operating 
systems, OpenArchitect-specific applications and libraries, plus, an innovative switch hardware 
design.
OpenArchitect hardware is in many ways similar to typical switch architectures. The primary 
difference in OpenArchitect is that the PCI bus that interfaces with the embedded processor and 
the switch fabric is at a higher performance level than a typical switch (see Figure 1.1: Fabric
Switch Elements)
. The use of PCI creates a pipe of significant bandwidth between the processor 
and the switch fabric.
The embedded processors, running Linux and the OpenArchitect processes, control the flow of all 
traffic by maintaining the switch forwarding tables. These tables define the flow of the switch 
traffic. Because they are on the switching chips,  packets proceed at line rate.
OpenArchitect Software Structure
OpenArchitect is based on an embedded Linux operating system and includes a number of ZNYX 
Networks-supplied modules. The key element is the Linux routing table, which is crucial in a 
Ethernet Switch Blade User's Guide
release  3.2.2j
page 20
Figure 1.1: Fabric Switch Elements