Zoom H22 ユーザーズマニュアル

 

Whenever you press the 

 

1

 

 (PLAY/PAUSE)

key while a recording is in progress, the
indication "MARKxx" (where xx is a number
from 1 to 99) appears on the display and a
mark is set. These marks can be used as BWF
compatible cue points (

 

→

 

 p. 24). A mark is

also automatically set when a dropout error
occurs during recording. To bring up a list of
all marks along with an indication of the time
(hours:minutes:seconds), proceed as follows.

 

At the stereo mode or 4-channel mode top
screen, press the 

 

4

 

 (MENU) key.

 

Repeatedly press the 

 

3

 

 (REW)/

 

2

 

 (FF)

keys to move the cursor to "FILE", and press
the 

 

5

 

 (REC) key.

 

Use the 

 

3

 

 (REW)/

 

2

 

 (FF) keys to move the

cursor to the file, and press the 

 

5

 

 (REC) key.

The name of the currently selected file appears
at the top of the display, and a list of available
files is shown.

 

Use the 

 

3

 

 (REW)/

 

2

 

 (FF) keys to move the

cursor to "MARK LIST", and press the 

 

5

 

(REC) key.

A normal mark is indicated by the symbol  .
A mark that was set because a dropout error
occurred is indicated by  . To scroll to mark
information not currently visible on the
display, use the 

 

3

 

 (REW)/

 

2

 

 (FF) keys.

 

• The indication on this screen is for 

information only. The mark number or time 
cannot be changed.

• If 99 marks have already been set and a 

dropout error occurs, only the indication 
"

Data Write Error

 " is shown but no mark is 

set.

 

Repeatedly press the 

 

4

 

 (MENU) key until

the stereo mode or 4-channel mode top screen
appears again.

H2-E.fm 59 ページ ２００７年７月１１日　水曜日　午後３時１９分