Zoom H22 ユーザーズマニュアル

 

To prevent changing settings by mistake while
recording, the H2 incorporates a function that
locks almost all controls. This is called the key
hold function. To enable the function, proceed
as follows.

 

When the key hold function is enabled, almost
all controls do not operate. Therefore the
selected operation mode will be maintained.

 

Press and hold the 

 

4

 

 (MENU) key until the

indication "Key Hold" appears on the display.

When the key hold function is enabled, all
controls except the [POWER] switch, [MIC
GAIN] switch, and 

 

4

 

 (MENU) key have no

effect. If any key is pressed, the indication
shown below will appear for 2 seconds on the
display.

 

Press the 

 

4

 

 (MENU) key and hold it until

the indication "Released" appears on the
display.

 

Using an SD card and a computer, it is
possible for the user to update the system
software of the H2. To do this, proceed as
follows.

 

For information on connecting the H2 to a
computer, see the section "Using the H2 as a
card reader" on page 71.

 

Insert the SD card of step 2 into the H2. Then
turn power on while holding down the 

 

1

 

(PLAY/PAUSE) key.
The following screen appears.

 

Use the 

 

3

 

 (REW)/

 

2

 

 (FF) keys to move the

cursor to "OK" and press the 

 

5

 

 (REC) key.

H2-E.fm 84 ページ ２００７年７月１１日　水曜日　午後３時１９分