Zoom H22 ユーザーズマニュアル

 

If there are problems during operation of the H2, check the following points first.

 

■

 

• Check the connections to your monitor

system, and the volume setting of the
system.

• Check whether the volume setting of the H2

is low.

 

■

 

• When using the built-in mics, check

whether the selected mic pattern and the
mic orientation are suitable (

 

→

 

 p. 21).

• Check the setting of the [MIC GAIN]

switch (

 

→

 

 p. 15).

• Check whether the recording level setting is

appropriate (

 

→

 

 p. 16).

• If a CD player or similar device is

connected to the [LINE IN] jack, try
increasing the output level setting of the
device.

 

■

 

• If anything is connected to the [EXT MIC

IN] jack or [LINE IN] jack, the built-in
mics do not operate and the mic pattern
cannot be selected. Disconnect all other
equipment.

• If something is connected to the [LINE IN]

jack, the [EXT MIC IN] jack is disabled.

 

■

 

• Verify that an SD card is inserted in the card

slot.

• If the indication "Key Hold" is shown on

the display, the key hold function is active.
Disable the key hold function (

 

→

 

 p. 84).

 

■

 

• Check the 3D panning settings and reset

them if necessary (

 

→

 

 p. 32).

 

■

 

• Check whether operating system of

computer is supported (

 

→

 

 p. 71).

• To make the computer recognize the H2,

the connection must be initiated from the
H2 (

 

→

 

 p. 71).

H2-E.fm 88 ページ ２００７年７月１１日　水曜日　午後３時１９分