Zhone IMACS-200 ユーザーズマニュアル
General Features
4-41
IMACS-200 General Features
Software Download Procedures
Note:
When upgrading from a PC, an ethernet cross-over cable will be required. Use the
TCPIP settings to put your PC on a network connection (such as 192.0.0.1), and set
the IMACS-200 on the same subnet (such as 192.0.0.2).
TCPIP settings to put your PC on a network connection (such as 192.0.0.1), and set
the IMACS-200 on the same subnet (such as 192.0.0.2).
2. At the Login screen, enter the system password.
The Main screen appears.
3. With the cursor on the CPU level, press P.
The Flash screen appears with status and data for memory blocks 1 and 2.
Figure 4-20.Flash Screen
4. Select the block to be replaced or updated. Press Enter.
The Flash screen appears with the software download commands at the bottom of the
screen.
screen.