Zhone IMACS-200 ユーザーズマニュアル
7-14
E&M Ports
Model No.
Running Head
TYPE
The Type informational field shows the current status of the signal field selected on the main
E&M port screen for this port. Valid settings for E&M and wink modes is loop (loop start).
E&M port screen for this port. Valid settings for E&M and wink modes is loop (loop start).
STATUS
The Status field shows the current status of the port. Table 7-5 lists and describes all of the
possible conditions reported by this field.
possible conditions reported by this field.
Table 7-5. Status Information Field Settings
Setting
Meaning
stdby
The E&M port is in standby.
W stb
WAN port to which the E&M port is assigned is in standby.
W tst
WAN port to which the E&M port is assigned is under test.
W OOS
WAN port to which the E&M port is assigned is out of service.
noWAN
There is no WAN port configured in the slot to which the E&M port is
assigned.
assigned.
call
Call set-up is in progress.
busy
Call is in progress.
idle
No call is in progress (port is available for a call).
TC
The port is in Trunk Conditioning because a CGA alarm occurred on the
associated WAN port.
associated WAN port.
test
A test is in progress on the port (i.e., you are actively controlling the circuit
by setting values for Tx ABCD or Rx ABCD).
by setting values for Tx ABCD or Rx ABCD).
maint
The port is in a maintenance condition.