Zhone IMACS-200 ユーザーズマニュアル
8-8
Sub Rate Data Ports
Model No.
Running Head
Test Screen
SRU Ports
8.3
Test Screen
Pressing “t” (Test command) in the SRU port Main Screen will bring up the Test Screen
shown in Figure 8-4. From this screen, you can create test situations between SRU ports, or
between a single port and data test equipment at a remote site.
shown in Figure 8-4. From this screen, you can create test situations between SRU ports, or
between a single port and data test equipment at a remote site.
Figure 8-4.Typical SRU port Test Screen
The bottom highlighted line of the Test Screen shows some actions you can perform from this
screen. To perform an action, just press the uppercase key for the desired choice. Table 8-4
lists these actions, and Table 8-5 lists the settings in the Test Screen, along with their possible
and default values. These settings are also described in the following paragraphs.
screen. To perform an action, just press the uppercase key for the desired choice. Table 8-4
lists these actions, and Table 8-5 lists the settings in the Test Screen, along with their possible
and default values. These settings are also described in the following paragraphs.