Zhone 4821-A2 ユーザーズマニュアル
4821-A2-ZN21-30
BitStorm 4800 Express Model 4821-A2 Installation Guide
35
C
ONFIGURATION
Overview
The BitStorm 4800 Express is designed to require minimal configuration
before it can be accessed by a Network Operations Center (NOC). When the
BitStorm 4800 Express is first powered up it is a fully functional bridge, and
all DSL ports are set to their maximum speed.
before it can be accessed by a Network Operations Center (NOC). When the
BitStorm 4800 Express is first powered up it is a fully functional bridge, and
all DSL ports are set to their maximum speed.
Initial configuration is performed using the Command Line Interface (CLI).
The CLI is available from a terminal or PC connected to the CONSOLE port,
or through the management port (Port 1).
The CLI is available from a terminal or PC connected to the CONSOLE port,
or through the management port (Port 1).
Additional configuration may be necessary, depending on the mode used to
manage the BitStorm 4800 Express:
manage the BitStorm 4800 Express:
z
Inband
z
Out of band through Port 1
This can be performed using the CLI, SNMP, or the web interface.
For more configuration information, see the
(for the CLI) and the online
Help (for the web interface).