Vupoint Solutions PDS-ST440-VP プリント

upwards 

2. 

Press [MENU] button to enter MENU Setup 

3. 

Press UP/DOWN buttons to select FORMAT 

4. 

Press [OK] to enter FORMAT mode 

5. 

Press UP/DOWN buttons to select FORMAT options 

a. 

YES: To FORMAT and erase contents in microSD card 

b. 

NO: To exit FORMAT mode and return to previous Menu 
setup screen 

6. 

Press [OK] to confirm selection and return to Menu Setup screen 

 

5.3.7 DELETE FILE setting   

1. 

Press [MENU] button to enter MENU Setup 

2. 

Press UP/DOWN buttons to select DELETE FILE 

3. 

Press [OK] to enter DELETE FILE mode 

4. 

Press UP/DOWN buttons to select DELETE FILE options: 

a. 

DELETE ONE: To delete last image scanned 

b. 

DELETE ALL: To delete all files on microSD card 

5. 

Press [OK] to confirm selection and return to Menu Setup screen 

 

To view scanner’s version number: 

 

1. 

Press [MENU] button to enter MENU Setup 

2. 

Press UP/DOWN buttons to select VERSION 

3. 

Press [OK] to confirm selection to display version number 

4. 

Press [MENU] to exit and return to Menu Setup screen 

 

Note: Perform calibration only when white balance needs adjustment 

1. 

With the dry cleaning cloth provided, clean the scanning lens 
located on the bottom of the scanner. 

2. 

Turn on the scanner by pressing the [POWER] button. Place the 
scanner on the white area of the White Balance Calibration paper 
provided. 

3. 

Press and hold the UP button. While holding the UP button, 
press the [POWER] button and then release both buttons to 
enter into auto-calibration mode. SD symbol 

  will flash and 

then stop. “GREEN” and “RED” LED light will turn on. 

4. 

Do not move the scanner. Wait until the “RED” LED turns off. 
“GREEN” LED will stay on. 

5. 

With only the “GREEN” LED light on, start scanning the white 
paper by sliding the scanner across the paper until the “GREEN” 
LED light turns off. (Slide the scanner backwards if necessary). 

6. 

Press and hold the [POWER] button to power off the scanner. 
Calibration is complete. 

 

 

1. 

Turn on the scanner by pressing the [POWER/SCAN] button for 
2 seconds. 

2. 

Hold the document firmly with one hand on a flat surface. 

3. 

Place the scanner on the edge of the paper approximately 5/8 to 
3/4 of an inch onto the page to ensure the whole document can 
be scanner. Make sure to keep the scanning area in between the 
scanning width indicators marked on the side of the scanner. 

       
 
 
 
 
 
 
 
 

4. 

Hold the scanner flat against the material and then press the 
[SCAN] button once. 

     

 

5. 

Slide the scanner slowly, keeping your hand stable to get the 
best quality picture. 

6. 

Press the [SCAN] button again to stop scanning. 

 

 

1. 

Press [PREVIEW] button to enter picture PREVIEW mode.   

2. 

Press UP/DOWN buttons to preview previous image 

3. 

Press [PREVIEW] button again to adjust ZOOM rate 
(x1/x2/x4/x8) 

4. 

Press [OK] to confirm selected zoom rate 

5. 

Press UP/DOWN or LEFT/RIGHT to view image in zoom mode. 

6. 

To exit PREVIEW mode press the [SCAN] button once 

1. 

Connect your scanner to your computer and then turn on your 
scanner. 

2. 

Your computer should recognize the scanner as a “Removable 
Disk.” Click “Open folder to view files” to view and import scans. 

NOTE: If the Removable Device window did not launch automatically, go to 

your “My Computer” (PC) and find the device under Removable 
Storage. 

Image sensor 

Color Contact Image Sensor 

Resolution 

High resolution: 600 dpi(default) 
Low resolution : 300 dpi 

Color mode 

Color mode (default) 
Black & white mode 

Maximum scanning   
speed for A4 size   
document 

Color High resolution: 12.0 Seconds 
Mono High resolution: 8.0 Seconds   
Color Low resolution: 5.0 Seconds 
Mono Low resolution: 3.0 Seconds 

600dpi color: 220 Photos(Min.) 

600dpi mono: 290 Photos(Min.) 

300dpi color: 780 Photos(Min.) 

Capacity (Based on   
1GB microSD card. 
Scan A4 size file,   
the quantity of scans   
varies depending on   
the content complexity)

 

300dpi mono: 1280 Photos(Min.) 

Scan width 

Approx. 8.35" 

Approx. Scan length 

300DPI: 46.5"(Max), 600DPI: 24.2"(Max) 

File format 

JPEG 

LCD Scanning 

status 

display 

Auto Power Off 

1mins, 3mins (default), 5mins, off,   

USB Port 

USB 2.0 high speed 

External memory 

microSD Card 

Standard Battery 

2XAA alkaline batteries 

     

 

Operating System

Windows® XP, Windows® Vista™, Windows® 7 and 
Mac OS® 10.4 or above   
(direct plug-in, driver installation not required) 

CPU 

Pentium II or above 

RAM 64MB 

 

Interface USB 

port 

Cannot turn on the   

scanner 

1. Low battery power. 

2. Battery not inserted 

properly 

1. Replace or install 

  the battery correctly

Pictures cannot be   

saved when you are 

scanning them 

1. microSD card has not 

been installed 

2. Memory is full   

3. The microSD card has 

not been formatted 

properly 

1. Install microSD card.

  Refer to Section 5.2

2. Download the 

pictures from the 

scanner to the 

computer to create 

storage space 

3. Format the microSD 

card. Refer to 

Section 5.3.6 

Computer does not   

recognize scanner 

when connected. (You 

cannot find   

removable disk) 

Connection failure.   

1.Make sure all cable 

  connections are  

  secured. Restart the

    computer if   

  necessary 

The battery life is   

very short 

Use wrong type of 

battery 

1.Replace with new 

  2x AA alkaline  

  batteries 

Blurry images 

1. Scanner sensor 

protective glass is dirty

2. Contact Image Sensor 

aged.  

1. Clean the sensor’s 

protective glass 

with clean, soft 

cloth. 

2. Re-calibrate the 

scanner 

LED ERR. is on after 

power on 

Calibration data is off set 1. Re-calibrate the     

  scanner. Refer to  

  Section 5.4 

ERR. LED is on when

scanning a document

Scanning speed is too 

fast 

1.Press the   

  Power/Scan button   

    to reset and scan the 

  document again 

 

                   

PDS-ST440-VP_Manual_11-0625 

AM-VPS-440-GB-R1