VXi Computer Hardware VX1410A ユーザーズマニュアル
STATus Subsystem
VX1410A & VX1420A IntelliFrame Mainframe Instruction Manual
3–79
STATus:QUEStionable:POWer:ENABle
STATus:QUEStionable:POWer:ENABle?
STATus:QUEStionable:POWer:ENABle?
Sets or queries the contents of the Power Enable register. Setting unused enable
bits does not generate an error; the bits are ignored.
bits does not generate an error; the bits are ignored.
If the power-on status clear flag is FALSE (see *PSC command on page 3–166)
at power on, the register value will be restored from nonvolatile RAM; otherwise
the register value at power on is set to #H7FFF. Executing the STATus:PRESet
command sets the register value to #H7FFF.
at power on, the register value will be restored from nonvolatile RAM; otherwise
the register value at power on is set to #H7FFF. Executing the STATus:PRESet
command sets the register value to #H7FFF.
STATus:QUEStionable:POWer:ENABle <Mask>
STATus:QUEStionable:POWer:ENABle?
<Mask>
Query response
<NRf> | <Nondecimal Numeric>
0
0
≤
N
≤
#HFFFF
<NR1>
Not Applicable
–222, “Data Out of Range”
You attempted to set the enable register to an illegal value.
You attempted to set the enable register to an illegal value.
None
Command:
STAT:QUES:POW:ENAB #H3FFF
Query:
STAT:QUES:POW:ENAB?
Response:
512
STATus:QUEStionable:POWer?
STATus:QUEStionable:POWer:CONDition?
STATus:PRESet
STATus:QUEStionable:POWer:CONDition?
STATus:PRESet
Syntax
Parameters
Reset Value
Errors and Events
Dependencies
Examples
Related Commands