Z Microsystems 19 ユーザーズマニュアル
Doc# 27-0023UM Rev 1.0 Issued 09/04
14
OPERATIONS
DISPLAY PANEL CONTROLS
The Command Console features push-button controls on the lower front of the front bezel.
To setup the display, use the following controls to fi ne tune the image on the screen:
To setup the display, use the following controls to fi ne tune the image on the screen:
NOTE: Th
e following procedures are
written for setup using the
buttons on the display panel.
See the “SoftMenus” section of
this manual for remote setup.
buttons on the display panel.
See the “SoftMenus” section of
this manual for remote setup.
Button functionality description table:
Channels
A — Green — VIDEO A is selected (primarly, standard)
B — Green — VIDEO B is selected (Optional channel available--
but
not
standard)
If A & B are both green, it indicates the Channel Auto Switching function is selected.
— green — power and signal
orange — power and no signal
off — Standby mode
Main
Display
Auto
Adjust
“Z”
<
>
<
>
Menu
Exit
Key
Func-
tions
Func-
tions
Auto
Position
Position
Move up
through
menu
func-
tions
through
menu
func-
tions
Move
down
through
menu
func-
tions
down
through
menu
func-
tions
Move
left to
adjust
value of
function
left to
adjust
value of
function
Move
right to
adjust
value of
function
right to
adjust
value of
function
Acti-
vates
menu
and
menu
func-
tions
vates
menu
and
menu
func-
tions
Exit
from
main
menu or
return
from
sub-
menu
to main
menu
from
main
menu or
return
from
sub-
menu
to main
menu
Hold down
to turn
backlight
on and
off; press
briefl y and
repeat-
edly to
increase or
decrease
backlight
brightness
to turn
backlight
on and
off; press
briefl y and
repeat-
edly to
increase or
decrease
backlight
brightness