Vortex Media VTX 1000 ユーザーズマニュアル

 

  

In order to send and receive audio to the SoundStation VTX 1000 Interface Module, you need to observe the 
following wiring procedure: 

 

1.)  Connect the Auxiliary Output of the Interface Module to a line level input of a Vortex device.      

2.)   Connect Output B the Vortex device to the Auxiliary Input of the Interface Module.  By default, 

Outputs A, B, and C of the Vortex device is a mix-minus version of the Input B signal.   

 

The drawing below illustrates the use Input B and Output B of a Vortex EF2280 to connect to the Interface 
Module. 

 

If you are using the Polycom Instant

Designer™ software, connect the Vortex inputs and outputs selected by 

the Instant

Designer to the SoundStation VTX 1000 interface Module. 

 

 

 

W

IRING

 

18