VIVOTEK Vivotek Webcam VS8100 ユーザーズマニュアル

 

 

This section explains how to configure a wired network connection for the Network Camera.

LAN

Select this option when the Network Camera is deployed on a local area network (LAN) and is intended 

to be accessed by local computers. The default setting for the Network Type is LAN. Please rememer to 

click on the 

Save button when you complete the Network setting.

Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by 

the DHCP server each time the camera is connected to the LAN.

Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera. 

1. You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the Network 

2. Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP or network 

administrator.

Subnet mask: This is used to determine if the destination is in the same subnet. The default value is 

“255.255.255.0”.

Default router: This is the gateway used to forward frames to destinations in a different subnet. Invalid 

router setting will disable the transmission to destinations across different subnets.