VistaQuest VQ-DV7 ユーザーズマニュアル

- 6 -

5. Getting Started

CAUTION

Please install the DV7 driver before using your DV7 with a PC.
The best way to transfer picture to the PC is using the Mass Storage mode to copy all your

pictures.

• Installing DV Batteries:

1.Slide open the battery compartment cover by pressing

the place as shown on the right side.

2.Insert four AAA-size alkaline batteries with positive (+)

and negative (-) poles matching the directions indicated

inside the battery cover.

3.Close the battery cover.

• Inserting SD/MMC Card:

This DV offers SD/MMC card for storing files:

SD Card -

Optional SD cards provide removable, reusable storage for pictures and videos.

Store as many pictures as you like, depending on the size of the card.

CAUTION:

• The card can only be inserted one way; forcing it may damage the DV or card.

Do not insert or remove a card when power is on.

1.Turn the DV off.

2.Position the card as shown. Push the card into the slot until it hooks up.
3.To remove the card gently push the card until it get released from the

hooking mechanism. After it has pooped out pull it out completely.

Note:

1.If the SD card is present in the DV and then the picture/ video will

save in the SD card.

2.If the “CARD FULL !!!” warning message shows on the TFT screen, it means the SD

card is full. Please remove the memory and insert a new one.