Viper 5706V オーナーマニュアル

37

© 2013 Directed. All rights reserved.

Feature Details

37

2.  Press the 

 button, the  parking lights will turn on and the  

  message will play on the remote control. 

3.  Turn the key to off, and remove it from the ignition, the engine  

continues running for the programmed runtime. 

4.  Exit the vehicle and arm the alarm.

Note

For Pit Stop on manual transmission vehicles follow the di-
rections in the Manual Transmission Start (MTS mode) sec-
tion with the door open.

Manual Transmission Start (MTS mode)

When installed into a manual transmission vehicle, the system requires 
that the MTS mode is properly set when parking. If MTS mode is not 
properly set or is defeated after being properly set the system will not 
start the engine and the 

 text and tones play as 

an alert.

1.  With the engine running, press the foot brake then set the parking 

brake and leave the engine running. For Pit Stop or Turbo Timer 
mode (to leave the engine running after arming) open the driver 
door.

2.  Release the foot brake. As long as the engine is running there is 

no time limit to perform this step.

3.  Within 20 seconds of foot brake release, press any command 

button on the remote, after 20 seconds return to Step 2 (For Turbo 
Timer Mode, press the optional dash mounted activation button 
or send the Timer Mode command from the Advanced Start menu 
screen).

4.  The parking lights flash five times to confirm MTS mode en-

able and the remote start activates the ignition outputs. The 

 

 text and beeps play to confirm.